Important Product Design Changes to the Acid Venting Systems of All Acid Feeders (Peristaltic Pumps), Acid Kits and Acid Maintenance Products
OVERVIEW
An important change has been made to the way Acid Venting products are setup. The external vent has been replaced with a non-return valve (one-way-valve).
WHY THE CHANGE?
You no longer need to put a hole in a wall or find a suitable place to vent the acid fumes.
The new design prevents harmful and corrosive fumes from escaping and damaging your expensive equipment, while at the same time allowing the intake of air, as the 5L or 15L acid bottle/container is slowly drained by the Auto feeder (Peristaltic Pump).
The red venting port pictured here has now been replaced with a white non-return value pictured below.
Non-Return Valve (White) [13101454035] pictured below.
BENEFITS
The new method is considerably easier to use.
No drilling required and not complicated venting designs.
Reduction of excess tubing draped around your equipment / plant room.
Better for the environment by reducing waste and reducing acid fumes.
PRODUCTS AFFECTED BY THE CHANGE
